PHOENIX STAR ASH CATCHER WITH MATRIX PERC

The best feature of this ash catcher is its powerful matrix percolator. A matrix perc is a cylinder-shaped percolator with many small holes arranged vertically and horizontally. This design creates a massive amount of bubbles, maximizing the smoke's contact with water for great filtration and cooling.

How Does A Matrix Perc Improve Filtration?

When you take a pull, smoke is forced through the grid of tiny slits in the matrix perc. This breaks the smoke into hundreds of smaller bubbles. The increased surface area helps the water cool the smoke and trap impurities more effectively. The result is a much smoother and cleaner hit compared to an ash catcher without a perc.

Does A Matrix Perc Ash Catcher Add Much Drag?

Any percolator will add some resistance, or "drag," to your pull. However, matrix percs are designed to balance high diffusion with good airflow. You may notice a slight increase in drag, but most users feel the trade-off is worth it for the superior smoothness and filtration.

• A matrix perc diffuses smoke through a grid of small vertical and horizontal slits.
• This design creates hundreds of bubbles for maximum cooling and filtration.
• Increased diffusion results in a noticeably smoother and cleaner hit.
• Matrix percs provide a good balance between high filtration and moderate airflow.

Picking the right ash catcher is key for stability and proper function. You need to match both the joint angle and size to your water pipe. Use this guide to make the perfect choice and avoid wobbly or leaky connections.

Your Fit Checklist:

• Identify Your Joint Angle: Check if your bong's joint is 45° (angled, common on beakers) or 90° (vertical, common on straight tubes).
• Match the Angle: Choose the ash catcher angle that matches your bong's joint to keep it upright.
• Confirm Joint Size: This model fits a 14mm joint, one of the most common sizes.
• Check Joint Gender: This ash catcher has a 14mm male joint, so it fits into a 14mm female joint on a bong.
• Consider Weight: Adding any accessory can affect balance. Ensure your bong has a stable base.
• Test for Fit: Once it arrives, test the fit before adding water to ensure a snug, secure connection.

Should I Get A 45 Or 90 Degree Ash Catcher?

The angle you need depends on the joint on your bong. A 45-degree ash catcher is for bongs with an angled downstem joint, like beaker bongs. A 90-degree ash catcher is for bongs with a vertical joint, which is common on straight tubes and many recyclers. Matching the angle ensures the ash catcher sits upright and works correctly.

Which Joint Size Do I Need For My Bong?

This Phoenix Star Ash Catcher is designed for a 14mm joint. It has a 14mm male joint that inserts into the 14mm female joint on your water pipe. The 14mm size is a popular standard, but you should always double-check your piece to be sure.

• A 45° ash catcher is designed for beaker-style bongs with angled joints.
• A 90° ash catcher is ideal for straight tubes with vertical joints.
• This model comes with a 14mm male joint to fit 14mm female bong joints.
• Choosing the correct angle prevents the ash catcher from tipping and spilling.

Every detail of the Phoenix Star Ash Catcher is built for reliable daily use. Made from high-quality materials, it is a durable accessory that provides consistent performance. The table below shows its key specifications and their benefits.

What Materials Are Used In This Ash Catcher?

This ash catcher is crafted from thick borosilicate glass, which is the standard for quality smoking accessories. This type of glass is known for its durability and resistance to heat, allowing it to handle frequent use and temperature changes without cracking.

• Made from thermal-resistant borosilicate glass for durability.
• Features a highly effective matrix percolator for diffusion.
• Equipped with a standard 14mm male joint for broad compatibility.
• Available in 45° and 90° angles to fit different bong types.

Setting up your new ash catcher is a simple process. Follow these easy steps to add it to your bong and get started.

3-Step Installation Guide:

1. Attach to Bong: Gently insert the 14mm male joint of the ash catcher into the 14mm female joint on your water pipe. Make sure it sits snugly without wobbling.
2. Add Water: Carefully pour a small amount of water into the ash catcher. The ideal water level is just enough to submerge the perc's bottom slits.
3. Test and Adjust: Take a small test pull without a packed bowl. If you get splashback, pour a little water out. If it doesn't bubble, add a bit more.

How Much Water Should I Put In A Matrix Perc Ash Catcher?

For a matrix perc, the best water level is just high enough to cover the lowest layer of slits on the percolator. Overfilling can cause water to splash into your bong or mouth, while underfilling leads to poor filtration. Start with a small amount and adjust until you get strong bubbling with very little splashback.

• Secure the ash catcher's joint into your bong's joint.
• Fill with water just enough to submerge the bottom of the matrix perc.
• Too much water can cause splashback during use.
• Adjust the water level based on your test pull for optimal function.

While the Phoenix Star Matrix Perc offers amazing diffusion, other options might suit different tastes or budgets. Here’s a quick comparison of similar ash catchers you might consider in the same price range.

How Does This Compare To Other Perc Types?

Matrix percs are known for high diffusion but can be tougher to clean. Honeycomb percs offer less drag and are easier to clean but might provide slightly less diffusion. Simple, no-perc ash catchers are the easiest to maintain but only trap ash, without adding extra filtration.

• The Phoenix Star Matrix Perc is best for achieving the smoothest hits.
• Honeycomb percolators generally offer less drag and are easier to clean.
• Basic, no-perc ash catchers are the most affordable and simplest to maintain.

Keeping your matrix perc ash catcher clean is important for its performance. Regular maintenance prevents resin buildup and ensures fresh-tasting hits every time. Because of the perc's complex design, a soak-and-shake method works best.

What Is The Easiest Way To Clean A Matrix Perc?

The best way to clean a matrix perc is with isopropyl alcohol (91% or higher) and coarse salt. Empty the old water, add a good amount of salt, and pour in enough alcohol to cover the perc. Seal the openings, shake it hard for 1-2 minutes, then rinse well with warm water. For tough buildup, let it soak for 30 minutes before shaking.

For an easier routine, try a dedicated glass cleaner from our cleaning supplies.

• Regular cleaning prevents resin buildup and ensures optimal performance.
• Use a mixture of isopropyl alcohol and salt to break down residue.
• Shaking the solution inside the ash catcher helps dislodge particles.
• For heavy buildup, allow the ash catcher to soak before shaking and rinsing.

This ash catcher is a great upgrade for many bongs. If you're looking for other sizes, perc types, or accessories, browse our complete collection.

• Shop All Ash Catchers